Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trims and stainless
steel panels in the appliance have a
layer of protective foil to prevent
scratching during transportation.
Remove this protective foil after the
appliance has been installed.
Cleaning and care
Please refer to the relevant
instructions in "Cleaning and care".
Useful tip: We recommend treating
stainless steel surfaces with the Miele
Care product for stainless steel
immediately after removing the
protective foil (see "Guide to the
appliance - Optional accessories").
Important! Each time the Miele Care
product for stainless steel is used, it
applies a protective film that is stain
and water resistant.
Clean the inside of the appliance and
the accessories.
Switching on and off
Accessories
- Bottle holder
The fins of the bottle holder jut out into
the bottle shelf and make bottles more
secure when opening and closing the
appliance door.
Attach the bottle holder to the middle
of the rear edge of the bottle shelf.
- Cool pack
Place the cool pack in the top drawer
of the freezer section.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
21