Installation
Unscrew the screws completely.
Place the fixing element on the
opposite side and loosely screw in
the screws .
Unscrew the screws completely
and loosely screw them in on the
opposite side.
If you have put locking pins into the
hinges to stop the door opening too
far:
Remove the locking pins from the top
of the hinges.
78
Carry out the following steps on both
doors.
Removing the soft-close mechanism
The soft-close mechanism
snaps shut when dismantled.
Place the door with the outer side
downwards on a stable surface.
Remove the soft-close mechanism
from the ball joint.
Unscrew the mounting and remove
the soft-close mechanism .