Setup; Greasing The Machine; Replacing The Warning Decal; Checking The Tire Pressure - Toro 30605 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine owner's Manual
Parts Catalog
Operator training materials
Declaration of Conformity
Note: Determine the left and right sides of the machine
from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Before operating the machine, grease it to ensure proper
lubricating characteristics; refer to
Important: Failure to properly grease the machine will
result in premature failure of critical parts.
Description
No parts required
Warning decal
No parts required
No parts required
Lubrication (page
Qty.
–
1
–
–
Qty.
1 Review before operating machine
1 Use to reference engine information
1 Use to reference part numbers
1 Review before operating machine
1
2

Replacing the Warning Decal

For CE Models Only
Parts needed for this procedure:
1 Warning decal
Procedure
37).
On machines requiring European CE compliance, replace
the warning decal Part No. 117-2754 with the warning decal
Part No. 117-2766.
12
Use
Grease the machine.
Replace the warning decal.
Check the tire pressure.
Check the fluid levels.
Use