Table of Contents
Advertisement
setup screen
Motion detection
You can set target detection region and motion, as well as the alarm signal output.
1.
From the Setup menu, select the
<Event (
2.
Click <Motion detection>.
3.
Specify the <Motion detection>.
Enable : Sets whether to activate
motion detection.
Sensitivity : Sets the sensitivity level
of the motion detection.
-
1 : LOW, 2 : MEDIUM, 3 : HIGH
4.
Set the activation time and condition.
Refer to the "Alarm Input" for how
to set the <Activation time> and
<Action>. (page 55)
5.
Select whether to display the mask area.
You can set maximum of 4 mask areas.
To set mask area, drag the desigred
area with mouse.
Motion detection is activated in the mask area set.
To delete set area, click [Delete (
6.
When done, click [Apply (
56_ setup screen
)> tab.
)] button.
)].
Advertisement
Table of Contents
