Table of Contents
Advertisement
setup screen
Audio setup
You can configure the I/O settings of the audio source from the network encoder.
Audio I/O can be performed only in channel 1.
1.
From the Setup menu, select the
<Audio & Video (
2.
Click <Audio setup>.
3.
Adjust the audio I/O levels to your
preference.
Audio-In : Set the audio input value.
Audio-Out : Set the audio output
value.
4.
When done, click [Apply (
PTZ setup
You can activate the zoom and set the zoom preset as you want.
1.
Select the <Audio & Video (
from Setup menu.
2.
Click the <PTZ setup>.
3.
Set the preset and serial port.
Preset setup : Select a number out of
255 and click Move button to adjust
the camera to the angle defi ned by
the selected preset. However, you
can specify up to 128 presets for
Samsung-E protocols.
The connected camera should be
confi gured to allow serial port
communication.
Serial Setup : You can set the RS-485 communication mode of the connected
camera.
The camera and device are connected via RS-485 communication ports.
The camera will not perform properly if communication related settings of the connected camera
are incorrect.
SAMSUNG-T/E and Pelco-P/D protocols are supported.
4.
When done, click [Apply (
46_ setup screen
)> tab.
)].
)> tab
)].
Advertisement
Table of Contents
