Table of Contents
Advertisement
CONNECTING THE NETWORK ENCODER TO A
BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM
This is for a small network environment such as homes, SOHO and ordinary shops.
Network Encoder
Network Encoder
Local PC
Configuring the network settings of the local PC connected to a
Broadband Router
Configuring the network settings of the local PC connected to a Broadband Router, follow
the instructions below.
Select : <Network Neighborhood>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the Broadband Router is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the Broadband Router is 192.168.0.1
IP address : 192.168.0.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the Broadband Router is 192.168.xxx.1
IP address : 192.168.xxx.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
M
For the address of the Broadband Router, refer to the product's documentation.
Refer to the "Port Range Forward (Port Mapping) Setup" section of the Broadband Router's
documentation. (Page 31)
PPPoE or
Broadband
Cable Modem
Router
<Properties>
<General>
<Internet Protocol (TCP/IP)>
INTERNET
PPPoE or
Cable Modem
DDNS Server
(Data Center, KOREA)
<Local Area Connection>
External Remote PC
<Properties>
English _25
Advertisement
Table of Contents
