network connection and setup
BUTTONS USED IN IP INSTALLER
Item
Device Name
Mode
MAC(Ethernet)
Address
IP Address
Protocol
UPnP Status
26_ network connection and setup
Model name of the connected network encoder.
Click the column to sort the list by model name.
However, search will be stopped if clicked during the search.
Displays either <Static> or <Dynamic> for the current network connection
status.
Ethernet address for the connected network encoder.
Click the column to sort the list by Ethernet address.
However, search will be stopped if clicked during the search.
IP address.
Click the column to sort the list by IP address.
However, search will be stopped if clicked during the search.
The factory default is "192.168.1.100~103".
Network setting for the network encoder.
The factory default is "IPv4".
Network encoders with the IPv6 setting will be displayed "IPv6".
This function is not currently implemented.
Description