Table of Contents
Advertisement
setup screen
4.
Search for the public certifi cate that you want to install on the network encoder.
To install the certifi cate on the network encoder, you need to provide a certifi cate
name (it can be arbitrarily assigned by the user), certifi cate fi le issued from the certifi -
cation authority and a key fi le.
The <HTTPS(Secure connection mode using the public certifi cate)> item will be active only if
there exists a public certifi cate installed.
5.
When done, click [Apply (
Installing the certificate
1.
Enter the certifi cate name.
2.
Select the certifi cate fi le to be installed and certifi cate key, and click [Install (
button.
Deleting the certificate
1.
Click [Delete (
EVENT SETUP
FTP / E-mail
You can configure the FTP / E-mail server settings so that you can transfer the images
stored in the network encoder to your PC if an event occurs.
1.
From the Setup menu, select the
<Event (
2.
Click <FTP / E-mail>.
3.
Select <FTP confi guration> or
<E-mail confi guration> and enter /
select a desired value.
FTP confi guration
-
Server address : Enter the IP
address of the FTP server that you
transfer the alarm images to.
-
User ID : Enter the user ID with
which you will log in to the FTP
server.
-
Password : Enter the user account
password for logging into the FTP server.
52_ setup screen
)] button.
)> tab.
)].
)]
Advertisement
Table of Contents
