Table of Contents
Advertisement
Configuring public DDNS in Network encoder Settings
1.
Open the DDNS settings page and select <Public DDNS> for <DDNS>.
2.
Enter the corresponding site's host name, user name and password.
3.
Click [Apply (
If the connection properly establishes, <(Success)> appears.
4.
Once completed with the confi guration, click [Apply (
IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1.
From the Setup menu, select the
<Network (
)> tab.
2.
Click <IP fi ltering>.
3.
Select a <Filtering type>.
Deny : If selecting this, access from
those IPs that are added to the
fi ltering will be restricted.
Allow : If selecting this, access from
only those IPs that are added to the
fi ltering will be accepted.
4.
Provide the IP that you want to grant or
deny access from.
5.
When done, click [Apply (
SSL
You can select a secure connection system or install the public certificate for this purpose.
1.
From the Setup menu, select the
<Network (
)> tab.
2.
Click <SSL>.
3.
Select a secure connection system.
To access the network encoder using HTTPS
mode, you have to type the IP address
for the network encoder in the form of
"https://<Network encoder_IP>".
)] button.
)].
)] button.
English _51
Advertisement
Table of Contents
