Port Range Forward (Port Mapping) Setup - Samsung SPE-400 User Manual

PORT RANGE FORWARD (PORT MAPPING) SETUP

If you have installed a Broadband Router with a network encoder connected, you must set the
port range forwarding on the Broadband Router so that a remote PC can access the network
encoder in it.
Manual Port Range Forwarding
1. From the Setup menu of the Broad-
band Router, select <Applications &
Gaming> - <Port Range Forward>.
For setting the port range forward for
a third-party Broadband Router, refer
to the user guide of that Broadband
Router.
2. Select <TCP> and <UDP Port> for
each connected network encoder to
the Broadband Router.
Each port number for the Broadband
Router should match that specifi ed in
<Network> - <Port> from the network
encoder's Setup menu.
3. When done, click [Save Settings].
Your settings will be saved.

M
Above sample instructions are based on the CISCO's Broadband Router (Model: LINKSYS).

The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
English _31