Connect And Adjust The Test Instruments - GE Bently Nevada 3300/25 Operation Manual

13.1 Connect and Adjust the Test Instruments

WARNING
High voltage present. Contact could
cause shock, burns, or death.
Do not touch exposed wires or
terminals.
1. Disconnect all transducer wiring from the channel A terminals on the Signal input
Relay Module.
2. Connect the function generator as shown in the figure above.
Section 13 - Test Alarms
Caution
Tests will exceed alarm setpoint
levels causing alarms to activate.
This could result in relay contacts
changing state. See
Bypass, Section 12.
Danger
29