Alert Leds - GE Bently Nevada 3300/25 Operation Manual

3300/25 Dual Accelerometer Input Monitor Operation Manual

3.3 Alert LEDs

ON
OFF
BLINK
LED DISPLAY
A
ALERT
ALERT
ALERT
ALERT
ALERT
NOTE: The monitor will not annunciate an alert condition if the monitor is in the
nonlatching mode and an alert condition existed but is no longer present.
8
B
If a channel ALERT LED comes on, that
channel has exceeded its Alert setpoint
level. Read Setpoint Levels, Section
describes how to read alarm setpoint
levels.
A flashing ALERT LED indicates that the
channel was the first in the rack to
exceed its Alert setpoint since the last
power up or reset.
If two channel alert alarms occur within
50 milliseconds, both LEDs could flash.
CONDITION
ALERT
RELAY
DRIVE
5, ON
ON