Connect The Signal Cable (For System Input) - GE 1926A-1AN Technical Manual

3

.Connect the signal cable (for SYSTEM input).

Connect the DVI-I connector of the display and the digital output of the system with the provided
DVI-D to DVI-D cable. Do not forget to tighten the screws of the cable. The display is shipped
with the default input selected to DVI-D. The user can also select the DVI-A option if necessary.
If the NO SYNC message appears, the wrong input signal is selected. Please check the video
input and change the source input. See Page 23 for details (OSD Source Select Menu).
OSD knob
Use the display's DVI-I connector to make this connection. Do not forget to tighten the
screws of the cable. See Page 23 for details (OSD Source Select Menu).
16
Digital output of SYSTEM
Analog output of SYSTEM