Transport And Storage; Delivery And Unpacking - Bosch REXROTH mMS 4.0 Operating Manual

Training system mMS 4.0 | R901429162/04.16
Required tool:
8

Transport and storage

8.1

Delivery and unpacking

Screwdriver, knife, pry bar.
Risk that the training system may fall over.
Risk of injury when lifting and transporting the machine!
When lifting and transporting the machine, always carefully do so with at least

two persons in order to prevent it from dropping.
Lift the mMS 4.0 training system by hand or with a floor conveyor.

Procedure Transport the wooden crate n upright to the place of unpacking using a fork lift

truck or pallet truck.
Open the wire ties on the wooden crate using a knife.

Using a screwdriver, undo the front of the wooden crates and put them away.

Open up the plastic packaging using a knife.

Carefully lift each station of the mMS 4.0 training system down from the pallet

and remove from the crate.
Carefully remove the cable ties and wire ties and dispose of them

appropriately.
Dispose of the pallet and wooden box properly or store appropriately for

subsequent use.
Any transport damage and defects must be noted right away and reported
in a written damage report.
Bosch Rexroth AG
Transport and storage
CAUTION
41/68