Operator Operating Positions - Bosch REXROTH mMS 4.0 Operating Manual

Training system mMS 4.0 | R901429162/04.16
Teaching stations

2.10 Operator operating positions

The training system must be placed on a level base as upright as possible,
and the guide rollers must be locked into place. In order to teach and learn
the procedures on the mMS 4.0 training system, the following space is provided
for the mMS 4.0 training system:
80
Fig. 1: Space requirement (in cm), mMS 4.0 training system
240
80
Fig. 2: Space requirement (in cm), mMS 4.0 training system
The following teaching stations are provided depending on how the mMS 4.0
training system is used:
Table 4: Teaching stations for an mMS 4.0 training system
Work step
Alignment
Control points
(per station)
400
0-80
80
0-80 234
80
80
Number of persons Number of persons
working on the system working on the system
per station
1-4 1-3
2 1-2
Bosch Rexroth AG 15/68
Safety instructions
234
80