Huawei FusionModule2000 Maintenance Manual page 47

FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator)
Item
Availability
of the fusion
module
actuator
Issue 01 (2020-12-25)
Method
1. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator >
Running
Parameters,
set Lighting
Control Mode
to Manual,
and click
Submit.
2. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator. On
the Running
Control page,
control the
lights.
NOTE
After checking the
fusion module
actuator, set
Lighting Control
Mode to the
status before the
modification.
Copyright © Huawei Technologies Co., Ltd.
Expected Result
The fusion module
actuator controls
the lights in the
aisle of the smart
module.
3 Routine Maintenance
Troubleshooting
If lights cannot be
switched on or off,
check whether the AC
power cables
connected to the
lights are loose. If so,
reconnect the cables.
Otherwise, replace
the fusion module
actuator.
40