Table of Contents
Advertisement
microHAM © 2004 All rights reserved
You can select frequency of CW side tone generated by internal speaker. Side tone is generated by main
micro KEYER CPU, not by pin.5 of WinKey. This pin is reserved always for the PTT or for second CW
output for second radio. (Useful with feature SO2R Extension box).
There are four selections for frequencies (1350, 675, 450, 338 Hz) and none.
Speed step defines step in WPM by pressing +/- on attached keypad.
All setting can be stored to the keyer memory for power up behavior or can be immediately applied. Presets
switching has no effect to WinKey settings.
Several settings can be changed and/or stored using external keypad or keyboard. Look at the External
Keyboard chapter.
Messages
In this tab you can define CW memories for WinKey. Up to 9 memories, each up to 50 characters long can
be stored to the keyer memory. Each memory can have delayed loop back or can be chained to another
memory. There are some special commands which can be applied during memory playback.
Set PTT = force PTT event as WinKey PTT event
Clear PTT = forcing release PTT event as WinKey PTT event
Merge = merge two characters together ( [M]AS will sound AS .-...)
24
Advertisement
Table of Contents
