microHAM micro KEYER Manual page 22

microHAM © 2004 All rights reserved
When foot switch is released there are several possibilities:
Restore PTT and Audio = if checked, state of PTT from computer or WinKey will be copied to the PTT
outputs by their settings. If not checked, PTT will not be applied until PTT from computer or WinKey will not
be released. Audio settings will be restored to RX state.
Restore CW = if checked state of CW from computer will be copied to the CW output according to its
settings. If not checked it will be not applied until PTT from the computer will not be released.
Restore FSK = if checked state of FSK from computer will be copied to the FSK output according to its
settings. If not checked it will be not applied until PTT from the computer will not be released.
There are also some additional settings. FSK from keyboard is a setting for FSK output. If external PS/2
keyboard is attached to the keyer and the foot switch is pressed:
Diddle LETTERS will generates periodically "LETTERS" special character if nothing is typed and UOS
automatically generates UOS function if box is checked.
Again, all these settings can be stored to the MK memory for power up behavior, immediately applied or
current setting can be stored to the presets.
22