Table of Contents
Advertisement
microHAM © 2004 All rights reserved
CW / WinKey
In this tab you can configure internal CW keyer based on K1EL WinKey chip. Thanks to Steve, K1EL for the
great product. Full WinKey manual is available at http://k1el.tripod.com/wkinfo.html.
CW output is wired in parallel with CW output from computer.
Mode = WinKey mode, Iambic A, Iambic B, Ultimatic and Bug Keyer
Paddle set point = level when the paddle should be closed
Swap paddles = swap paddle means reverse paddles for left handed or reverse wired paddle
Auto space = keyer generates automatic character space
CT space = keyer generates shorter automatic character space
Speed pot min/max = min/max value of the front panel speed knob (5 to 99 WPM range)
DIT / DAH = 100 / = Dit/Dah ratio from 1:2 to 1:4. Accepted number is from 200 to 400.
Weighting = weighting in percentage (from 10 to 90%)
1st extension = extension of the first dit or dah in milliseconds (QSK)
Keying compensation = extension of each dit and dah in milliseconds (QSK)
PTT lead in/tail = lead and tail delays of automatic PTT. PTT from WinKey must be allowed in PTT / FSK
tab.
23
Advertisement
Table of Contents
