Balance Time Display; Time Delay - Blomberg WAF 1500 Operating Instructions Manual

Balance time display

When a programme is running, the display
shows the time remaining for the pro-
gramme to complete. The time is dis-
played in hours and minutes as "hh:mm".

Time delay

With the time delay function you can delay
the programme start. You can enter a time
delay of up to 24:00 hours. Setting can be
made in increments of 30-minutes.
A
Do not use liquid detergent when you
set time delay! Risk of staining of the
clothes.
21
21a
1. Open tap, load laundry and fill in de-
tergent.
2. Set the wash programme, tempera-
ture, spin speed and if necessary addi-
tional functions.
3. Press 21 button.
4. Set the desired time delay with the ro-
tary knob. The set time is shown on
the display together with the 21a sym-
bol.
5. Press the >Start/Pause< button. The
time delay countdown phase begins.
The colon at the centre of the dis-
played time delay starts blinking.
3
During the time-delay period more
laundry can be loaded. At the end of
the time delay countdown the 21a in-
3
The length of a programm depends
on the type of program and the addi-
tional functions selected. The details in
the table "Technical data and con-
sumption figures" refer to programms
without additional functions.
dicator lamp goes out and the wash-
ing cycle begins.
Changing the delay time
If you want to change the time during the
countdown:
1. Press the >Start/Pause< button. The
colon at the centre of the display stops
blinking.
2. Press 21 button.
3. Set the desired time delay with the ro-
tary knob.
4. Press the >Start/Pause< button. The
time delay countdown phase begins.
The colon at the centre of the dis-
played time delay starts blinking.
Cancelling the time delay
If you want to cancel the time delay count-
down and start the programme immedi-
ately:
1. Press the >Start/Pause< button. The
colon at the centre of the displayed
time delay stops blinking.
2. Press 21 button.
3. Set the time delay to "00:00" with the
rotary knob.
4. Press the >Start/Pause< button to start
the programme.
15