The Fluff Filter; The Fluff/Sponge Filter Unit - Blomberg TKF 1350 Operating Instructions Manual

or with a soft, dry cloth.
4. Insert the fluff filter the right way round.
The fluff filter/sponge filter unit
Fluff balls, that are not retained by the
main fluff filter, will be caught in the air
tube by a second filter. This is made of
a second fluff filter or a filter-mat made of
sponge.
The control indicator "Clean the con-
denser" will automatically indicate the
frequency with which this filter unit should
be cleaned (To achieve the maximum
energy efficiency from your dryer, it is
recommended to clean the fluff filter and
the sponge filter unit before after every
drying cycle.
Cleaning the fluff filter/sponge filter unit:
1. Open the slit
2. Pull the filter unit at its handle
3. Carefully remove the fluff balls around
the fluff filter by hand or with a soft, dry
cloth.
4. Open the sponge filter unit by pressing
the red button
5. Remove sponge filter
6. The sponge filter must be cleaned
when covered with a layer of fluff. Clean-
ing is not necessary when there are only
a few fluffs. Wash the sponge filter by
hand and squeeze out the water so that
the sponge filter is only moist.
Important: Single fluffs remaining in the
sponge filter will not impair the functioning
of the heat pump!
7. Reinsert the sponge filter.
8. Close the filter unit with the red button.
9. Move the filter unit until it snaps in.
15