Creating Scenario - Mitsubishi Electric MELCloud Installation And Operation Manual

MELCLOUD
6.9.1

Creating scenario

The first step is to assign a name to each scenario. The scenarios can be operating states such as cooling/heating or ON/
OFF. Situations such as absent/home can also be used as the name. Assigning situation-based names makes future con-
trol via voice commands easier, e.g. say "Activate absent" to switch off all units. The next step is to assign an image to
the scenario and to select the systems that are to be included in the scenario. Select "Next" to specify the settings for the
respective systems.
Software information 2019 / 49