MELCLOUD
6.3.3
System Registration
UNIT REGISTRATION
NOTE!
►To register an air conditioner on MELCloud, you will need a Mitsubishi Electric wi-fi adapter MAC-
567IF-E (or the adapter included in the delivery). For operation and monitoring, the adapter has to be
connected to your ATA/ATW or Lossnay unit and to the internet via a wi-fi router.
►It is not possible to register a unit on MELCloud if the unit is not connected to the internet via a Mitsubi-
shi Electric wi-fi adapter MAC-567IF-E (or the adapter included in the delivery).
The information required to register the unit can be found on the wi-fi adapter ID plate (Refer to the illustration below):
•
12-character hexadecimal code. Enter this code by "MAC" (001DC990E913 in the example).
•
10-digit serial number. Enter this number by "ID" (1301170012 in the example).
•
Or you can scan the QR code on the wi-fi adapter.
32 / Software information 2019