Edit Building In Melcloud - Mitsubishi Electric MELCloud Installation And Operation Manual

MELCLOUD
6.3.4

Edit Building in MELCloud

NAME
Assign any name to each unit.
ADD BUILDING
Under "Add building" enter the name, type, address and postal code of the building.
The address and postal code are mandatory. They are needed by MELCloud to be able to provide live weather data.
SELECT FLOOR
Different floors can be added to your building (e.g. ground floor, 2nd floor, etc.) under "Add floor". This information is op-
tional. Dividing the building into different floors is relevant for the users of larger buildings that may have multiple floors
and several systems that can be displayed in MELCloud.
SELECT SECTION
Under "Select section", systems in large buildings can be grouped into sections, making them easier to find. If your build-
ing is small, we recommend skipping this step.
34 / Software information 2019