Scenarios - Mitsubishi Electric MELCloud Installation And Operation Manual

MELCLOUD
6.9

Scenarios

2
1
Scenarios can be used for cross-system control of units, groups of units or multiple locations.
The scenarios can be configured as needed. Foe example, scenarios for "Absent" and "Present" can be created.
All ATA/ATW or Lossnay units can be changed to the configured operating modes.
1 2
Select "Add" to create a new scenario or to modify it. Select "Delete" to delete a previously created scenario.
The scenarios can also be used later for voice commands,
thus offering maximum convenience.
48 / Software information 2019