Huawei FusionModule500 Quick Manual page 6

4.5
(Optional) Installing a Server
1. Determine the installation position of the server and check whether floating nuts are installed.
If not, install them first.
2. Install guide rails.
5. Connect the server power cable.
a. Wear an ESD wrist strap or ESD gloves.
b. Connect one end of the power cable to
the cable port on the AC power module
of the server.
d. Route the power cable along the cable tray neatly, use cable ties to bind the power cable,
and use diagonal pliers to trim off the excess of the cable ties.
3. place the server on the guide rails, and push
it into the cabinet.
4. Secure the server.
c. Use a hook-and-loop fastener to secure
the power cable.
5