Huawei FusionModule500 Quick Manual page 19

2. Check functions of water sensors.
Check Method
Immerse the two
contacts of the electrode
water sensor in water.
3.10 Commissioning the Electrode Water Sensor
1. The DIP switch of the T/H sensor on the front door is set to 2, and that of the T/H sensor on
the rear door is set to 1.
Toggle
Address
Switch 1
1 ON
2 OFF
2. Add a T/H sensor.
a) Log in to the ECC800-Pro WebUI as an administrator.
b) Add a T/H sensor.
Path
Choose System Settings >
Device Management and
click Add Device. The
parameters for adding devices
are displayed.
c. Click Test Connect to check whether the T/H sensor connects to the ECC800-Pro properly.
3. Check the function of the T/H sensor.
Check Method
Check the running
information about the
T/H sensor on the WebUI.
Set T/H sensor alarm
thresholds.
Normal Connection Status
Leak DI alarm is generated
on the active alarm screen
of the app or on the WebUI.
Toggle Toggle
Switch 2 Switch 3
OFF OFF
ON OFF
Parameter
Device attribute
Device attribute
Connect To
Communications
Port
Device Address
Normal Connection Status
Choose Monitoring > Aisle > T/H Sensor Group > T/H Sensor n >
Running Info, and view the current cabinet temperature and
humidity.
Choose Monitoring > Aisle > T/H Sensor Group > T/H Sensor n >
Running Parameters and set High temperature alarm
threshold, Low temperature alarm threshold, High humidity
alarm threshold, and Low humidity alarm threshold as required.
18
Alarm Clearance Method
Wipe dry the two contacts of
the water sensor. The alarm
disappears automatically.
Toggle Toggle
Switch 4 Switch 5
OFF OFF
OFF OFF
Setting
Select Sensor from the drop-down list box.
Select T/H sensor from the drop-down list
box.
Select ECC800 from the drop-down list box.
Select COM1 from the drop-down list box.
In this example, device address is set to 1.
During actual configuration, set the device
address for the T/H sensor based on the
actual situation.
Toggle
Switch 6
OFF
OFF