Purging Gas Connections (Optional) - Siemens SIPROCESS GA700 Quick Start Manual

Connecting
5.2 Gas connections
Note
Identifier of the gas connections
The identifier of the gas connections is imprinted as numbers 1 to 4 on the module plate.
Version with pipes
The sample gas connections are made of stainless steel with material no. 1.4571 and are
designed as connecting fittings with a pipe diameter of 6 mm.
Connect the gas lines to the corresponding inlets/outlets.
Note
Pipes
Connect the pipes with the gas connections using suitable clamp ring screwed glands.
The material of the parts in contact with the gas (clamp ring screwed glands) must be
appropriate to the application.
5.2.3.5

Purging gas connections (optional)

Overview
Note
Closing purging gas connectors when unused
Close the purging gas connections using the sealing caps when the device is not being purged.
74
Compact Operating Instructions, 05/2015, A5E31805656-03
Quick Start