Bosch Rexroth MSK Project Planning Manual page 156

154/175 Bosch Rexroth AG
Installation
13.3.3 Motor mounting
Synchronous Servomotors MSK For Potentially Explosive Areas
Mount the motor and pay attention:
1. Avoid clamping or jamming the centering collar on the motor side.
2. Avoid damaging the holder on the system side.
3. Connect the motor to the machine and observe the tightening torques.
4. Check strength and accuracy of connection before proceeding.
After proper mechanical assembly, carry out the electrical connection.
DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P