Advertisement
DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P
Synchronous Servomotors MSK For Potentially Explosive Areas
11.2.2
Storage times
Additional measures must be taken on commissioning to preserve proper
functioning – irrespective of the storage time which may be longer than the
warranty period of our products. However, this does not involve any
additional warranty claims.
Motors
Bearing time / months
Measures for commissioning
> 1
> 12
> 60
■
■
■
Visual inspection of all parts to be damage-free
■
■
■
Resurface the holding brake
Check the electric contacts to verify that they are free from
■
■
corrosion
Let the motor run in without load for one hour at 800 ...
■
■
1000 rpm
Measure insulation resistance. Dry the winding at a value
■
■
of < 1kOhm per volt rated voltage.
■
Exchange bearings
■
Exchange encoders
Tab. 11-5:
Measures before commissioning motors that have been stored over
a prolonged period of time
Cables and Connectors
Bearing time / months
Measures for commissioning
> 1
> 12
> 60
■
■
■
Visual inspection of all parts to be damage-free
Check the electric contacts to verify that they are free from
■
■
corrosion
Visually inspect the cable jacket. Do not use the cable if
■
you detect any abnormalities (squeezed or kinked spots,
color deviations, ...).
Tab. 11-6:
Measure before commissioning cables and connectors that have
been stored over a prolonged period of time
Bosch Rexroth AG
143/175
Transport and storage
Advertisement
