Advertisement
120/175
Bosch Rexroth AG
Operating conditions and application notes
10.3
Design and installation positions
Synchronous Servomotors MSK For Potentially Explosive Areas
Motor design B05
IM B5
Flange attachment on the
drive side of the flange
Tab. 10-6:
Permissible conditions of installation according to EN 60034-7:1993
NOTICE
If motors are attached according to IM V3, fluid present at the output shaft
over a prolonged time may penetrate and cause damage to the motors.
Ensure that fluid cannot be present at the output shaft.
DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P
IM V1
Flange attachment on the
drive side of the flange,
drive side facing down
Motor damage due to penetration of liquids!
IM V3
Flange attachment on the
drive side of the flange,
drive side facing up
Advertisement
