2-7. Removing/Installing the Cabinet and FTP Panels
Removing/Installing the FTP Panel F
Removal
1. Rotate the knob assembly in the counterclockwise direction and remove it. (Both S, T)
(Refer to "Removing/Installing the FTP Panel A".)
2. Remove the four screws, and remove the core stopper (B). (Both S, T)
(Refer to "Removing/Installing the FTP Panel A".)
3. Remove the protector assembly. (Both S, T) (Refer to "Removing/Installing the FTP Panel A".)
4. Remove the two screws, and remove the film guard assembly. (Both S, T) (Refer to "Removing/
Installing the FTP Panel A".)
5. Remove the guard stopper assembly. (Both S, T) (Refer to "Removing/Installing the FTP Panel A".)
6. Remove the OPS cover. (Refer to Section 1-10, step 9.)
7. Remove the gate base assembly. (Refer to Section 3-2-1.)
8. Remove the PAD assembly. (Both S,T) (Refer to Section 4-2.)
9. Remove the four PAD positioning shafts, and remove the pad SA retainer assembly, pad SB retainer
assembly, pad TA retainer assembly, and pad TB retainer assembly.
Pad SA retainer assembly
Pad positioning shaft
Pad SB retainer
assembly
Pad positioning shaft
Pad positioning shaft
2-30
Pad TA retainer
assembly
Pad positioning shaft
Pad TB retainer assembly
FVS-1000 MMP1