4. Removing the lamp house front panel
assembly
Remove the six screws, and remove the lamp house front
panel assembly.
Filter assembly
Lamp house panel
assembly
B3 x 12
B3 x 12
B3 x 12
5. Replacing the filter assembly
(1) Remove the four screws, and remove the filter assem-
bly.
(2) Install a new filter assembly with four screws.
FVS-1000 MMP1
B4 x 14
B4 x 14
3-4. Replacement of Periodic Replacement Part
Installation
6. Installing the lamp house front panel
assembly
Install the lamp house front panel assembly with six
screws.
7. Installing the LC-35 board
(1) Install the LC-35 board with four screws.
(2) Connect the harnesses disconnected in step 3 to the
LC-35 board. (Refer to the following figure for the
locations of the connectors.)
LC-35 board
CN101
CN21
CN20
CN1
CN19
CN2
CN4
CN18
CN17
CN16
CN5
CN7
CN503
CN6
(3) Install the LC-35 board cover with two screws.
8. Securing the lamp house
Secure the lamp house assembly to the base plate.
(Refer to Section 3-2-3.)
9. Installing the gate base assembly
Install the gate base assembly. (Refer to Section 3-2-1.)
10. Performing the electrical adjustment
After replacement, perform the "LC-35 Board Adjustment"
and "Light Amount Adjustment" of Section 6-6 "Lamp
House Adjustment".
CN201
CN15
CN3
CN14
CN11
CN9
CN12
CN8
CN10
CN13
3-21