Sony FVS-1000 System Maintenance Manual page 58
Multi resolution film scanner, multi resolution telecine, telecine processor, telecine hdtv/sdtv processing boards, telecine log data processor, telecine 16 mm film adaptor kit, telecine optical kit, telecine mounted slide kit, telecine film sound process
Hide thumbs
Also See for FVS-1000 System:
- Operation manual (44 pages) ,
- Maintenance manual (138 pages)
Table of Contents
Advertisement
1-11. Installation of Optional Units
(5) Insert the AU-278 board along the guide rail, tighten the top and bottom screws of the board panel
alternately, and insert the board completely until it connects to the connector.
(6) Connect the sub harness (ANALOG) and sub harness (DIGITAL) to the CN700 and CN703 connec-
tors.
(7) Connect the sub harness (PRE-AU) to the CN100 connector of the AU-278 board.
Screw (with stopper)
Harness (PRE-AU)
Harness (ANALOG)
Harness (DIGITAL)
(8) Draw the sub harness (PRE-AU) between the chassis and the main unit so as not to contact it with the
link portion of the move panel.
(9) Install the harness cover using the two screws.
(10)Install the duct using the four screws. (UC/CE model only)
Duct (for UC/CE model only)
1-46
CN100
CN700
AU-278 board
CN703
Screw (with stopper)
Harness cover
B4 x 6
B4 x 6
Harness (PRE-AU)
B4 x 6
Harness (PRE-AU)
FVS-1000 MMP1
Advertisement
Table of Contents
