Bkfv-500 - Sony FVS-1000 System Maintenance Manual

1-11. Installation of Optional Units

1-11-5. BKFV-500

The BKFV-500 is the system to convert the audio data recorded on the 35 mm/16 mm film to the audio
signals.
The BKFV-500 is composed of the following blocks.
. AU-278 Board
. Analog Audio Assembly
n
When BKFV-500 is installed to the unit with the following serial numbers, the updating described below
are necessary.
Affected serial numbers: FVS-T1000: 10003, 10302, 10303, 10304, 10401, 10402, 10403, 10404, 10405,
Check method whether updating is required
Check the indication on the board position label (F) (3-617-622-02) pasted on the front lower o the
processor chassis.
If the board name is displayed on the label in one line, the updating is required.
If the board name is displayed on the label in two lines, the updating is not required.
When updating is required, please contact your local Sony Sales Office/Service Center.
Updating Items
Blank panel replacement
Blank panel (1):
Blank panel:
Blank panel (5):
Board position label
Board position label (F):
Board position label (R):
Label
Label (B):
Screws and studs
Screw M4 for panel opening/closing: 3-623-829-01 (8 pcs)
Stud for M4:
Fixtures
To install the BKFV-500, the following fixtures and tools are necessary.
. Metal scale:
. L-shaped hexagonal wrench:
. Screw driver (+):
. Screw driver (_):
. 35GR height gauge:
. 35GR reference base assembly: J-6515-080-A
. Reference base assembly:
. Slit position adjustment tool
1-42
10502, 10503, 10601,and 10602
3-617-421-03 (1 pc)
3-628-101-02 (1 pc)
3-623-820-04 (1pc) (If BKFV-300 is already installed,
this part in not necessary.)
3-617-622-03 (1 pc)
3-617-621-03 (1 pc)
3-623-818-02 (1 pc)
3-623-828-01 (8 pcs)
Length : 150 to 300 mm
Subtense :1.5 mm, Subtense : 2.5 mm, Subtense : 3 mm,
Subtense : 4 mm, Subtense : 8 mm
M3 to M5
M3 to M4
J-6515-050-A
J-6515-150-A
FVS-1000 MMP1