Samsung NX-308 Programming & Installation Manual page 35

# 34 Allow Codes for Class of Service B
Defines what leading digits in a dialling plan are to be allowed. There are 10 line entries (0-9) which
define up to 12 digits per entry.
Press  key.
1.
PROGRAMMING is displayed.
2. Dial 34.
Display shows ALLOW IN CLASS B.
3. Enter 0 - 9 to select line entry.
'BA x' is displayed, where x is line entry 0 - 9.
4. Enter up to 12 digits allowed for dialling.
Press  key.
5.
(Press HOLD key to clear entry and enter new data.)
# 35 Deny Codes for Class of Service C
Defines what leading digits in a dialling plan are to be restricted. There are 10 line entries (0 - 9) which
define up to 12 digits per entry.
Press  key.
1.
PROGRAMMING is displayed.
2. Dial 35.
Display shows DENY IN CLASS C.
3. Enter 0 to 9 to select line entry.
'CD x' is displayed, where x is line entry 0 - 9.
4. Enter up to 12 digits to be toll restricted.
5. Press # key.
(Press HOLD key to clear entry and enter new data.)
# 36 Allow Codes for Class of Service C
Defines what leading digits in a dialling plan are to be allowed. There are 10 line entries (0 - 9) which
define up to 12 digits per entry.
1. Press # key.
PROGRAMMING is displayed.
2. Dial 36.
Display shows ALLOW IN CLASS C.
3. Enter 0 to 9 to select line entry.
'CA x' is displayed, where x is line entry 0 - 9.
33