4.
Display shows extension number followed by three digits indicating allow or deny status for
each line.*
5.
Enter 0 or 1 for each line.
One digit must be entered for each of the three C.O. lines:
0 = Deny
1 = Allow
Press key.
6.
(* Default: 111 for all stations.)
# 32 Internal Paging
Allows or denies receipt of an internal page for stations.
Press key.
1.
PROGRAMMING is displayed.
2.
Dial 32.
Display shows ENABLE ALL CALLS followed by eight digits indicating allow or deny
status for each station.*
3.
Enter 0 or 1 for all eight stations.
0 = Deny
1 = Allow
Press key.
4.
(*Default: 1 (allow) for all stations.)
# 33 Deny Codes for Class of Service B
Defines what leading digits in a dialling plan are to be restricted. There are 10 line entries (0-9) which
define up to 12 digits per entry.
Press key.
1.
PROGRAMMING is displayed.
2.
Dial 33.
Display shows DENY IN CLASS B.
3.
Enter 0 - 9 to select line entry.
'BD x' is displayed, where x is line entry 0 - 9.
4.
Enter up to 12 digits to be restricted.
Press key.
5.
(Press HOLD key to clear entry and enter new data.)
32