Mitsubishi Electric Melsec Q Series User Manual page 97

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 24
(7) Switch to the normal mode
After the setting has finished, click the
setting screen, and set Switch 4 of the intelligent function module switch settings
to the normal mode. (Refer to Section 4.5.)
POINT
If an error code is displayed while performing the setting operation, the details and
measure of the error can be confirmed by clicking the
error code display area. In addition, the error code can be cleared by clicking the
Error clear button.
Close button to close the offset/gain
... button to the right of the
MELSEC-Q
5 - 24