Mitsubishi Electric Melsec Q Series User Manual page 95

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 22
(6) Switch to the normal mode
When the offset/gain setting screen is closed by clicking the
the setting operation has finished, module's operation mode transits to the
normal mode.
POINT
If an error code is displayed while performing the setting operation, the details and
measure of the error can be confirmed by clicking the
error code display area. In addition, the error code can be cleared by clicking the
Error clear button.
MELSEC-Q
Close button after
... button to the right of the
5 - 22