Mitsubishi Electric Melsec Q Series User Manual page 115

6 PROGRAMMING
6 - 8
(2) Operating the utility package
Operate the utility package on the remote I/O station side.
Set the following in the Intelligent function module parameter setting module
select area.
• Start I/O No.
• Module type
• Module model name
(a) Initial setting (refer to Section 5.4)
CH1, CH2, CH3 A/D conversion enable/disable setting ...... "Enable"
CH1 Averaging process setting ............................................ "Sampling"
CH2 Averaging process setting ............................................ "Averaging"
CH2 Time/number of times specifying .................................. "Number of times"
CH2 Average time/average number of times setting ........... "50"
CH3 Averaging process setting ............................................ "Averaging"
CH3 Time/number of times specifying .................................. "Time (ms)"
CH3 Average time/average number of times setting ........... "1000"
: 20
: A/D Conversion Module
: Q64AD
MELSEC-Q
6 - 8