Mitsubishi Electric Melsec Q Series User Manual page 116

6 PROGRAMMING
Digital output value read
Error code display and reset
6 - 9
(b) Auto refresh setting (refer to Section 5.5)
CH1 Digital output value ..................."W11"
CH2 Digital output value ..................."W12"
CH3 Digital output value ..................."W13"
Error code ........................................."W14"
(c) Writing the intelligent function module parameters (refer to Section 5.3.3)
The intelligent function module parameters are written to the remote I/O
station.
This operation is performed using the Intelligent function module parameter
setting module select screen.
(3) Programming example
POINT
To write the intelligent function module parameters, set the target remote I/O station
from [Online] - [Transfer setup] on GX Developer.
They can be written by:
• Directly connecting GX Developer to the remote I/O station.
• Connecting GX Developer to another device such as a CPU module and
passing through the network.
MELSEC-Q
Read CH1 Digital output value
Read CH2 Digital output value
Read CH3 Digital output value
Output the error code in BCD
Turn on Error clear
request (YF)
Turn off Error clear
request (YF)
6 - 9