Adjusting The Transport Speed; Adjusting The Mowing Speed - Toro Greensmaster TriFlex 3420 Operator's Manual

or refer to the Service Manual for further
adjustment.
Adjusting the Transport
Speed
Obtaining the Maximum Transport
Speed
The traction pedal is adjusted for maximum-transport
speed at the factory, but you may need to adjust it
if the pedal reaches full stroke before it contacts the
pedal stop, or if you want to a decrease the transport
speed.
To obtain the maximum-transport speed, put the
functional control lever in the T
press down on the traction pedal. If the pedal contacts
the stop (Figure 45) before you feel tension on the
cable, perform the following adjustment procedure:
Figure 45
1. Pedal stop
1. Put the functional-control lever in the T
position and loosen the locknut securing the
pedal stop to the floor plate
2. Tighten the pedal stop until it does not contact
the traction pedal.
3. Continue applying a light load on the transport
pedal and adjust the pedal stop so it contacts
the pedal rod and tighten the nuts.
Important:
Ensure that the tension on the
cable is not excessive or you will reduce the
cable life.
position and
RANSPORT
g015494
RANSPORT
(Figure 45).
Reducing the Transport Speed
1. Press down on the traction pedal and loosen the
locknut securing the pedal stop to the floor plate.
2. Loosen the pedal stop until you obtain the
desired transport speed.
3. Tighten the locknut securing the pedal stop.
Adjusting the Mowing
Speed
The mow speed is set to 3.8 mph at the factory.
The forward moving speed can be adjusted from 0 to
8 km/h (0 to 5 mph).
1. Loosen the jam nut on the trunnion bolt
46).
2. Loosen the nut securing the lock and mow
brackets on the pedal pivot.
1. Jam nut
2. Nut
3. Rotate the trunnion bolt clockwise to reduce the
mowing speed and counterclockwise to increase
the mowing speed.
4. Tighten the jam nut on the trunnion bolt and the
nut on the pedal pivot to lock the adjustment
(Figure 46). Check the adjustment and adjust
as required.
43
Figure 46
3. Trunnion bolt
(Figure
g014625