Towing the Machine
In case of an emergency, you can tow the machine
less than 0.4 km (1/4 mile); however, Toro does not
recommend this as standard procedure.
Important:
Do not tow the machine faster than
3 to 5 km/h (2 to 3 mph) because it may damage
the drive system. If the machine must be moved
further than 0.4 km (1/4 mile), transport it on a
truck or trailer.
1.
Locate the bypass valve on the pump and rotate
it so that the slot is vertical
Figure 37
1. Bypass valve-slot shown in closed (horizontal) position
2.
Before starting the engine, close the bypass
valve by rotating it so that the slot is horizontal
(Figure
37). Do not start the engine when the
valve is open.
(Figure
37).
g014627
36