Lowering The Operator's Seat; Lubrication; Lubricating The Drive-Roller Bearing - Toro GreensPro 1260 Operator's Manual

Lowering the Operator's
Seat
Tilt the seat down until the seat latch snaps securely
over the seat-latch pin
Figure 24
1. Seat latch
(Figure 24).
2. Seat-latch pin

Lubrication

Lubricating the Drive-Roller
Bearing
Service Interval: Before each use or daily Lubricate
Grease Type: No. 2 lithium grease
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Wipe the area clean so that foreign matter
cannot be forced into the bearing.
3. Pump grease into the grease fitting as shown
in Figure
g279772
4. Wipe up any excess grease.
Important:
off the turf somewhere briefly to disperse any
excess lubricant, to avoid damaging the turf.
23
the drive-roller bearing immediately
after each washing.
25.
Figure 25
After greasing, run the machine
22).
g036790
g036789