Toro GreensPro 1260 Operator's Manual page 18

Figure 20
1. Hitch assembly (forward)
2. Hitch-lock lever (up)
Disconnecting the Machine from
the Tow Vehicle
Park the machine on level ground and chock the
wheels.
Push down on the hitch-lock lever while removing
the hitch assembly from the tow-vehicle hitch
20). Release the latch when the hitch and the hitch
assembly are disengaged.
Lower the Machine onto the
Rollers
1. If the machine is connected to a tow vehicle,
disconnect the machine from the tow vehicle;
refer to Disconnecting the Machine from the Tow
Vehicle (page 18).
2. Remove the locking pin
g028434
3. Hitch assembly
(backward)
4. Hitch-lock lever (down)
(Figure
(Figure 21).
1. Locking pin
3. Lift up on the hitch assembly to tip the machine
up slightly.
4. Push down on the hitch latch to unlatch the hitch
(Figure 21).
5. Raise the hitch
locks in the slide detent
18
Figure 21
2. Hitch latch
(Figure 22) until the latch lever
(Figure 17).
Figure 22
g024199
g279827