Product Overview; Controls - Toro GreensPro 1260 Operator's Manual

Product Overview

Figure 10
1. Hitch-lock lever
2. Hitch latch
3. Seat-adjustment lever
4. Parking brake
5. Steering wheel
6. Light switch
1. Spark plug
2. Muffler
3. Air cleaner
7. Motion pedals
8. Tilt-steering pedal
9. Hour meter
10. Latch lever
11. Hitch pedal
12. Hitch assembly
Figure 11
4. Recoil starter
5. Recoil-start handle

Controls

Parking Brake
Engage the parking brake to allow the machine to
start. To engage the parking brake
back on the parking-brake lever. To disengage it,
push the lever forward.
g279748
1. Parking
brake—disengaged
Steering Wheel
Turn the steering wheel
the machine in the forward direction.
Turn the steering wheel counterclockwise to turn the
machine in the rearward direction.
Note:
As the direction changes at the end of every
run, you will need to practice with the machine to
become accustomed to the steering.
The steering wheel controls the angle of the smoothing
rollers, which in turn steer the machine. The amount
the wheel can be turned is limited, so the turning
radius of the machine is large.
Tilt-Steering Pedal
To tilt the steering wheel toward you, press the foot
pedal (Figure 10) down, pull the steering tower toward
g019903
you to the most comfortable position, and release the
pedal.
Motion Pedals
The foot-operated motion pedals
to either side of the base of the steering wheel,
control the motion of the drive roller. The pedals are
connected so that they cannot both be pressed down
at the same time, you can press only 1 pedal at a
11
(Figure 12), pull
Figure 12
2. Parking brake—engaged
(Figure 10) clockwise to turn
(Figure 10), located
g027608