Huawei FusionModule 1000A20 Maintenance Manual page 22

FusionModule1000A20 Prefabricated All-in-One Data
Center
Maintenance Guide
Check Item
(Optional) Pad
Exit button
Issue 01 (2019-07-15)
Description
RF_Z indicator
Appearance
Function
Copyright © Huawei Technologies Co., Ltd.
Criteria
and then off for 1s).
Blinking fast: The
communication is
interrupted or the
registration with the
ECC800 fails (the
indicator blinks at 4 Hz,
on for 0.125s and then off
for 0.125s).
Blinking: The indicator
blinks at super short
intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for
0.05s) and then turns off
for 0.5s. The cycle lasts
for 10s.
On: There are no network
parameters. A network is
waiting to be created.
Blinking slowly: A
network is set up, and
node access is not
allowed (the indicator
blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at super short
intervals: A network is
set up, and node access is
allowed (the indicator
blinks at 10 Hz, on for
0.05s and then off for
0.05s).
Blinking at super short
intervals intermittently:
The device is searching
for a network (the
indicator blinks at 2 Hz,
on for 0.5s and then off
for 0.5s).
The exterior is intact and
the touchscreen is
working properly.
The function is normal.
3 Routine Maintenance
Troubleshooting
For details, see the
ECC800 documents.
Replace the pad.
Replace the exit button.
15