Table of Contents
Advertisement
FusionModule1000A20 Prefabricated All-in-One Data
Center
Maintenance Guide
Figure 3-1 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or damaged area to
remove the dirt and dust. Then wipe off the alcohol with a clean and dry cotton cloth.
Figure 3-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint one layer of zinc-rich primer on the damaged coat using a brush or painting gun,.
Issue 01 (2019-07-15)
Copyright © Huawei Technologies Co., Ltd.
3 Routine Maintenance
10
Advertisement
Table of Contents
