Sinamics Topology (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-32
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.28

SINAMICS topology (configuration)

The "SINAMICS topology" dialog specifies how and which user data must be provided for the
SINAMICS topology in the control.
In the dialog, the actual topology can be compared with the target topology. Drive objects for
non-existent modules can already be created here.
This dialog corresponds to the "System configuration" dialog.
You can configure the following property groups for the "SINAMICS topology" dialog page:
● Dialog
● Axis-drive assignment
● Comparison topology (*.ust)
● User-specified topology (*.utz)
● DO variables
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Notes on the topology - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
197