Siemens SINUMERIK 840D sl Operating Manual page 264

Create MyConfig - Expert
4.5 Component editor
Note
Selected data areas define target areas
Which target areas are displayed depends on the data areas (archive, PCU, NCU/PPU) that
were activated for use.
The data areas are defined in the project folder in the "Package" (Page 137) tab.
If a data area is deactivated subsequently, all the target area nodes that cannot be hidden due
to content are shown in red.
Note
Display of the target area
● Gray - target area does not contain any data.
● Red - data in the target area is not used.
● Blue - linked data with resolution for deployment.
● Purple - linked data with resolution during runtime.
Copy context menu
New
Insert copy
264
Creates a folder in which data can subsequently be stored as
copy or link.
Permits adding of folders and files to the project.
The data is not linked in the process. Instead, it is copied to the
component. Archive contents can also be imported via this en‐
try.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE